Reagecon Knowledge Base
Articles, Catalogues and Technical Papers on Chemical and Physical Standards
This page includes an archive of articles, technical papers and catalogues. These papers are intended to assist customers, distributors and researchers in the fields of testing and industry standards. The papers, articles and catalogues can be viewed on the site or downloaded. If any information is used from these papers in other articles, attribution and a link back to the original article on this site is required.
Colour (Color) Standards
Reagecon manufactures the full range of ASTM, Saybolt, Platinum-Cobalt (Hazen), Gardner, European Pharmacopeia and United States Pharmacopeia Colour Standards for use with ASTM, APHA, ACS, European and United States Pharmacopeia standard methods.
Colour Standards
The measurement of colour is now an exact science. This is due to the simultaneous evolution of high-quality instrumentation, and high-quality standards to calibrate and control this instrumentation. This publication outlines the evolution of colour measurement from...
Colour Standards
This short video provides viewers with an overview and short summary of Colour Standards.
The measurement of colour is now an exact science. This is due to the simultaneous evolution of high-quality instrumentation, and high-quality standards to calibrate and control this instrumentation.
Colour measurement is also a highly sophisticated science and accurate measurement is necessary in almost every industry. Such industries range from the Pharma and Cosmetics industries, right through to both potable and polluted waters, Beverages both alcoholic and non-alcoholic, Food and many other industrial segments.
Conductivity Measurement – Do you comply with the Pharmacopoeias
Abstract Although the water conductivity monographs of Ph. Eur. and USP have been in place for several years, there is still considerable confusion within the pharmaceutical industry on their interpretation and implementation. This paper gives a detailed...
Conductivity Standards
This short video provides viewers with an overview and short summary of Conductivity Standards. It briefly describes how Conductivity Standards are measured and used.
The measurement of electrical conductivity in liquid or conductivity measurement as it is more commonly known is an extremely popular and important measurement. The correct performance of the measurement is dependent on using high quality equipment, in particular a good sensor used in the correct manner and in the right environment. It is particularly important that the sensor is calibrated correctly and in a timely manner and that the test is correctly controlled.
Conductivity Standards
Did You Know more than 2,000 laboratories worldwide are now using Reagecon’s Conductivity Standards ?
To enable analysts to achieve the correct result when measuring conductivity and to prove the correctness of that result, Reagecon has developed a high quality range of Conductivity Standards
Cryoscope Standards
Reagecon manufactures a range of high quality Cryoscope Standards, the range is completed by the availability of Heat Transfer Fluid and Bath Liquid.
Cryoscope Standards – Freezing Point Measurement and Standards
This short video provides viewers with an overview and short summary of Cyroscope Standards. It briefly describes how Cyroscope is measured, the different types and applications of Cryoscope along with what industries predominantly use Cyroscope Standards.
One application of the change in freezing point is to measure the concentration of water in a solution, which is known as Cryoscopy.When water is added to a solution such as milk, the freezing point is elevated towards zero degrees Centigrade and differs markedly from that of a normal, undiluted milk sample.
Density Measurement and Density Standards
What is Density? Density, also called Mass Density, is a fundamental physical property of a material. It is defined as the mass per unit volume at a specific temperature. Mathematically, density is expressed as mass/volume where the SI units are kg/m3 but g/cm3 or...
Density Standards
This short video provides viewers with an overview and short summary of Density Standards.
Density, also called Mass Density, is a fundamental physical property of a material. It is defined as the mass per unit volume at a specific temperature. Mathematically, density is expressed as mass/volume where the SI units are kg/m3 but g/cm3 or g/ml are also widely used. The density of a material varies with temperature and pressure.
© Copyright 2022 Reagecon Diagnostics Ltd. All rights reserved.